MTI Wireless Edge MT-120018/G - Manual

Washer spring M8
Qty: 4
Washer flat M8
Qty: 4
Spring washer M5
Qty: 4
Item: 3
Flat washer M5
Qty: 4
Item:2
Wall/Poll bracket
Qty: 1
Arm bracket
Qty: 1
Nut M8
Qty: 2
Bolt M8x40
Qty: 4
Bolt M5x16
Qty: 4
MT-120018/A only
Qty: 1
base bracket
Antenna/enclosure
Item: 1
Bolt M8x70
Qty: 2
INSTALLATION INSTRUCTIONS
Item: 11
Use tightening torque of 5.7N/m.
in item 1 is aligned with the elevation axis.
FOR MT-120018/G
Item: 5
Item: 6
Item: 7
Item: 8
Item: 9
Item: 10
Clamping bracket
Qty: 1
using items 2,3,4 as shown.
BASE BRACKET INSTALLATION TO ANTENNA
Item: 12
Item: 13
SHEET 1 OF2
Verify that the oriantation of the hole
Attach item 1 to the back of the antenna
BASE BRACKET INSTALLATION
TO ENCLOSURE
RD42255000C/REV-A
x4
3
AXIS
x4
1
ELEVATION
2 4
x4
(MT-120018/A
ONLY)
x4
2
ELEVATION
Attach item 1 to the back of the enclosure
AXIS
Verify that the oriantation of the hole
in item 1 is aligned with the elevation axis.
Use tightening torque of 5.7N/m.
1
3
x4 x4
using items2, 3, 13 as shown.
For radio in 45
use this set of holes
13
Nut M5
Qty: 4
Item: 4