MTI Wireless Edge Indoor Antenna - Manual

Secure the cable to a fix foundation to prevent cable tenstion or
weight to be loaded on the antenna.
2
1 WALL INSTALLATION
Attach the adapting plate item 2 to the wall in the desire location
by using 3 screws (not supplied with the antenna).
Note the up mark on the adapting plate is position upward. Attach
the antenna item 1 to the adapting plate. Directed the antenna to
the desired direction (note the radiation side mark on the antenna)
Tighten screws A and B to prevent antenna movement.
For antennas without cable. Connect the cable to the antenna.
RF CABLE
CONNECTION
WINDOW INSTALLATION
3
2
the antenna.
UP SIGN
1
B
Insert the 3 suction cups, items 3 into the
keyholes in the adapting plate item 2.
Clean the mounting area on the window with
solvent. Position the adapting plate with the
top arrow pointing up. Presse the plate to the
window, Verify the suctions cap are well pressed.
Attach the antenna item 1 to the adapting plate.
Directed the antenna to the desired direction (note
the radiation side mark on the antenna). Tighten
screws A and B to prevent antenna movment.
For antennas without cable. Connect the cable
to the antenna. Secure the cable to a fix foundation
to prevent cable tenstion or weight to be loaded on
A
SHEET 1 OF 2
WIRELESS EDGE
INSTALLATION INSTRUCTIONS
RD41388300C/B
11 Hamelacha St. , Afek Industrial Park, Rosh Ha’ayin 48091, Israel
Fax: 972-3-9025051, Tel: 972-3-9025050
www.mti-group.co.il