MTI Wireless Edge MT-120018 - Manual

ONLY)
X4 X4
(MT-120018/A
Attach item 1 to the back of the enclosure
using items2, 3, 13 as shown.
Verify that the oriantation of the hole
in item 1 is aligned with the elevation axis.
Use tightening torque of 5.7N/m.
AXIS
13
1
ELEVATION
3 2
X4
For radio in 45
use this set of holes
x4
4
in item 1 is aligned with the elevation axis.
1
AXIS
ELEVATION
Use tightening torque of 5.7N/m.
2
BASE BRACKET INSTALLATION TO ANTENNA
using items 2,3,4 as shown.
3
x4 x4
Verify that the oriantation of the hole
Attach item 1 to the back of the antenna
BASE BRACKET INSTALLATION
TO ENCLOSURE
SHEET 2 OF 4
WIRELESS EDGE
RD41169400C/REV-G
11 Hamelacha St. , Afek Industrial Park, Rosh Ha’ayin 48091, Israel
Fax: 972-3-9008901, Tel: 972-3-9008900
www.mtiwe.com