Directed Electronics 6000 User Manual

Page 15

1999 Directed Electronics, Inc.

To disarm the security system,

turn the ignition to the "ON"

position. Press the Valet switch

the preset number of times (1-5

times) within 15 seconds. The

system should now disarm. If

the system does not disarm, you

may have waited too long; turn

the ignition off and on and try

again.

LOCATION OF VALET SWITCH______________________________

IMPORTANT! The unit can be programmed to respond to 1-5 pulses of
the Valet

switch for the disarm function. Be sure to check with the

installer for the desired programming.

To temporarily turn off the arm or disarm chirps, use Silent Mode

™

Simply press

for less than one second before arming or dis-

arming, and the confirmation chirp(s) will be eliminated for that

one operation only. If you want the arm/disarm chirps turned off

permanently, your dealer can do this for you.

NOTE: The Warn Away

response to lighter impacts is bypassed if the

system is armed using Silent Mode. This ensures that no chirps will be
emitted by the siren in an area you want chirp-free. The system is still
fully capable of triggering. Only the Warn Away

response is bypassed.

Silent Mode

DRW-35