Directed Electronics 6000 - Manual (Page 10)

6
© 1999 Directed Electronics, Inc.
and Buttons
An optional auxiliary convenience or expansion function that you
have added to your system can be activated by pressing and
simultaneously.
The auxiliary output controls _____________________________.
Using Your System
The buttons used in the instructions in this manual correspond to
the standard configuration. Remember, this is not the only way
your transmitter may be set up. It can be custom configured to
meet your needs.
You can activate, or arm, the system by pressing on your trans-
mitter for one second. When the system arms, you will hear a short
siren sound, or chirp, and the parking lights will flash once. If the
vehicle’s power door locks have been connected to the system, the
doors will lock.
While the system is armed, the status LED will flash approximately
once per second, indicating that the system is actively protecting
your vehicle. If you hear a second chirp after arming, and see the
status LED flashing in groups, refer to the Diagnostics section of
this guide. This extra chirp is called Bypass Notification.
Arming