Directed Electronics 6000 - Manual (Page 14)

10
© 1999 Directed Electronics, Inc.
This security system proudly offers High Security Disarm. High
Security Disarm is a feature that makes it possible to silence and
reset the system while it is triggering, without disarming the
system. If the system is triggered, and the siren has been sound-
ing for longer than six seconds, pressing on the remote
transmitter will stop the trigger and return the unit to the armed
state. The system will not disarm, but rather reset. This prevents
you from disabling the system should you wish to disarm it
without visually checking the vehicle. Pressing a second time,
after resetting the system, will disarm the system. Pressing
during the first six seconds of the triggered sequence will disarm
the security system immediately. The six second timer is provided
for your convenience, in case that the system is accidentally trig-
gered.
This feature allows you to disarm the security system without the
remote transmitter should it be lost, damaged or disabled. In order
to disarm the system without a remote transmitter, you must have
the vehicle’s ignition key and know where the Valet ® switch is
located. Be sure to check with the installer for the location and
the number of presses of the Valet switch required to disarm the
system.
Disarming Without a Transmitter
High Security Disarm