Datamax I-4208 - Manual (Page 47)

I-Class 37
4.1.3 Print Control
☞
Refer to Section 2.1.1 for detailed information on print quality controls.
HEAT
—
10 (0-30)
Controls the ‘burn-time’ of the printhead. This
is the equivalent of Heat Setting on most label
software programs.
PRINT SPEED Controls the rate of label movement during
the printing process; see Appendix C.
FEED SPEED Controls the rate of label movement between
printing areas; see Appendix C.
REVERSE SPEED Controls the rate of label movement during
backup positioning for start of print, cutting or
present distance; see Appendix C.
ROW OFFSET
—
00.00in (0-99.99)
Shifts the vertical start of print position. This
is the user setting for row adjustment.
COLUMN OFFSET
—
00.00 in (0-99.99)
Shifts the horizontal, left-justified start of
print position to the right without shifting the
Label Width termination point to the right.
This is the user setting for Column Adjust.
PRESENT DISTANCE
—
0.00 in (0-4.00)
Sets the label stop position past the start of
print. When the next label format is received,
the printer will automatically backfeed to the
start position. If a quantity of more than one
label is printed without a present sensor
enabled, or if the present distance is set to
zero, the printer will operate without
reversing.