Setting up the printer, 0 installation – Datamax I-4208 User Manual

Page 23

I-Class

Setting Up the Printer

3.0 Installation

This section explains how to connect the printer, and load it with media and
ribbon.

; Note: When connecting the AC Power Cord or interface cables to the printer,

ensure the Power On/Off Switch is in the ‘Off’ position.

Place the printer on a firm, level surface.

Turn ‘Off’ the Host Computer and ensure that the Power Switch on the

Printer is in the ‘Off’ position.

Depending upon your interfacing requirements, connect the appropriate

interface cable between Host Computer and Printer; see Section 3.0.1.

Connect the AC Power Cord to the receptacle on the back of the Printer,

and then plug the AC Power Cord into a properly grounded outlet. (The
power supply automatically detects and then adjusts to the applied line
voltage; see Section 7.0 for the acceptable voltage ranges.)

☞

If connecting the printer to a network or USB port, refer to the additional
documentation supplied with that option.

This manual is related to the following products:

I-4206