Mighty Mule MM402 - Manual (Page 10)

viii Mighty Mule FM402 Installation Instructions rev 082211
IMPORTANT SAFETY INSTRUCTIONS
Warning signs (4 enclosed) to be installed on both sides
of each gate (3–5 feet above the bottom of the gate)
!
Product identification label (2)
installed under rear mount of each arm
Control box label (1)
installed on front of the control box
Logo and warning labels (4)
installed on each side of opener housings
TO MANUALLY OPEN AND CLOSE THE GATE
1. Turn opener power switch OFF.
2. Disconnect front and rear mount from mounting brackets.
3. Remove opener from mounting brackets and move gate.
Disconnect opener ONLY when the power switch is OFF and
the gate is not moving.
www.mightymule.com
1-800-543-GATE (4283)
1. KEEP CLEAR! Gate may move at any time.
2. Do not allow children to operate gate or play in gate area.
3. This gate is for vehicles only. Pedestrians must use separate entrance.
Maximum Gate: 300 lbs. (136.1 kg); 12 ft. (3.7 m) • Voltage: 12 Vdc;
Frequency: 0Hz; Power: 25W • Class I Vehicular Swing Gate Operator
402
DUAL GATE OPENER
GTO DC SWING SERIES
Conforms to UL325
5th Edition Standards
Serial No.
MM402-0000000
XXXXXX
Gates That Open, LLC - Tallahassee, Florida USA
9901178