Martin Archery Martin Compound Bow - Manual (Page 13)

DYNA™ SINGLE CAM SYSTEM
The Dyna System is unique among all other single cam systems. The Dyna
System has modular draw length adjustment, and can be adjusted in one inch adjustments
within each draw length module.
PARTS OF THE DYNA™ CAM SYSTEM
Module
Screw
Speed
Ball
Bearing
Bottom
Cam
Module
Speed
Ball
Bearing
Idler
Wheel
9
CHECKING THE CAMS
At rest, you can use
these holes in the cam
and their relationship
with the limb to be
sure that the cams are
working together. The
position of the hole
and the limb will vary
based on limb angle,
but as long as the top
matches the bottom, it
is ready to shoot.
You can also check
the bow at full draw.
Pull the bow back on a
scale and watch the cir-
cled areas of the cam
come to rest on thier
cables. They should
touch at the same time.
If the top cam happens
to touch first, twist the
split string. If the bot-
tom touches first, twist
the control string.
If the bottom cam is touching
its cable and the top looks like
this, put a twist in the split
string until both cams touch
together.
If the top cam is touching its
cable (the bottom looks like
this), put a twist in the control
string until both cams touch
together.