Martin Archery Martin Compound Bow - Manual (Page 12)

CHANGING THE DRAW
Your Tru-ARC+ uses two dif-
ferent cam sizes to cover the full range
of draw lengths. Each cam covers 4" of
draw in half inch increments. Both cams
use the same module. Refer to your dealer
or www.martinarchery.com to find out
what module position gets which draw
length on your cam. You dealer can
exchange cams if needed to attain your
draw length.
To move the modules, you will need
to remove or loosen the mod screws
and rotate the mod to the proper letter.
Higher letters give longer draw lengths.
8
Short draw Long draw
Top
Bottom
STRINGING DIAGRAM
Shooting String
Control String Split String
Top Module
Bottom Module
Changing Draw Length
Draw length
indicators
There is no need to press your bow when changing your draw length on
the new Tru-Arc+. Your modules are lettered A through G. Each letter will
change your draw ½”. Make sure that both cams are in the same draw set-
ting to keep them both working together.
Top Bottom