Lingenfelter L250110309 Lingenfelter C6 ZR1 Corvette Supercharger Front Cover 2009-13 v2.2 - Manual (Page 25)

Page
86. Apply a 5 mm (0.2 inch) band of
threadlocker (Loctite Blue, GM PN 12345382
or equivalent) to the threads of the 10
supercharger bolts. Place the ten bolts into the
supercharger.
87. With the help of an assistant, place the
supercharger assembly back in place on the
engine. Align the dowel pin at the right front of
the supercharger to the cylinder head.
WARNING: Do not lift from by-pass actuator.
24.
85. Make sure the cylinder head and engine
area are free of loose debris.
Remove the tape from the cylinder head
intake ports.
NOTE: If you removed the fuel rail and injectors
as part of this process, the fuel rail and injectors
must be installed prior to the intercooler cover
installation.
88. Torque down the ten (10) supercharger
bolts, refer to the next step for the torque
pattern and specifications.