Laerdal Virtual Phlebotomy - Manual (Page 78)

8.1 Calibration of the Haptic Device
When the haptic device requires calibration, a message will appear on the screen which looks like this:
It is important to calibrate the device at regular intervals as prompted by the system, or the system
will “drift”, potentially causing erroneous measurements.
In cases where the haptic device is not connected or does not initialize properly, the following screen
will appear. Make sure that the device is properly connected, and that the proper needle is attached.
Rebooting the system and disconnecting and reconnecting the power cord to the device will usually
fix this problem. The initialization screen is shown below:
Administration
www.laerdal.com 78
Virtual Phlebotomy
Directions for Use