Laerdal Virtual Phlebotomy - Manual (Page 60)

Training Sequence
www.laerdal.com 60
Virtual Phlebotomy
Directions for Use
To use a multi-sample needle and tube holder, select the appropriate gauge from the inventory on
the left side of the screen and move it to the arm. A target cursor will appear on the arm. Locate the
insertion point on the arm with the target cursor; click and the needle will appear. Insert the multi-
sample needle/tube holder combination into the needle insertion receptacle located in the middle of
the haptic device. A slight tug will be felt as the needle is engaged by the haptic device. After engage-
ment, the transparent needle on the screen will be highlighted. The position of the bevel will also
appear in the circle next to the arm.
To palpate the arm, select the Palpation button on the top left of the Simulation Screen. Move the
palpation fingers to a location on the arm, click the mouse and feel the vein using the top part of the
haptic device. To palpate a new location on the arm, move the cursor and click a new location. The
palpation fingers are automatically removed when you select another piece of equipment, or click the
palpation button a second time.
All Body Substance Isolation (BSI) techniques should be followed. These may include the use of gloves
and goggles, which can be selected and deselected by clicking on the corresponding icon.
The insertion site can be prepared using the cleansing supplies in the inventory. All items must be dis-
posed of properly, either in the trashcan, biohazard bag or the sharps container.