Laerdal SimMan Essential - Manual (Page 21)

21
Manikin Setup
System Setup
Sim
ulation Setup
Clinical F
eatur
es
Maintenance
Tr
oubleshooting
Spar
e Par
ts
System Setup
Activating the Instructor Software license
The Instructor Application license needs to only be activated once. Instructor PCs shipped from Laerdal Medical have a pre-activated
license installed. Two spare licenses are provided for use on other computers. Should the software need to be re-installed, it is not
necessary to reactivate the software license.
TO ACTIVATE THE LICENSE:
1 Select or select
using other options> in the License key dialog box.
2 Activate the license manually by following the on-screen
instructions.
Note: The SimMan Essential software comes with 3 license
keys. For more license keys please contact your local
customer service office.
Changes or updates of the computer hardware (e.g. new hard drive or mother board) may render the license invalid. Please contact
your local Laerdal support to assistance with re-activating the license.
Wireless and LAN configuration
The SimMan3G Network Configuration Tool (SNCT)allows you to configure the network behavior of the SimMan3G manikin.
For more information on Wireless and LAN configuration, see the SimMan3G Network Configuration Tool Help file (Press the
key on the PC keyboard).
Configuring Your Network
The SimMan3G is equipped with a small router that provides WLAN connectivity. This router can be configured two ways: Either the
manikin creates a wireless network (Access Point mode) or the manikin is hooked up to an already existing network (station/client
mode). The mode of operation is selected by changing a switch on the router, located inside the manikin’s pelvis.
MANIKIN CREATED NETWORK (ACCESS POINT MODE) [DEFAULT]
The default operation is AP, i.e. where manikin creates a
wireless network. The switch on the router is set in AP mode.
The manikin is set up to create a network called SimMan3G.
WPA2/PSK-AES is the preferred security/encryption setting
and also the default. The default preshared key is SimMan3G.
This should, however, be changed with the SimMan 3G
network configuration tool.
USB Reset Router AP Client USB Reset Router AP Client