Labconco Coated Steel, Fiberglass and PVC Blowers 7183200 - Manual (Page 44)

40
Chapter 7: Modifying Your Blower
Product Service 1-800-522-7658, International 816-333-8811
Blower Transition Adaptors
This epoxy-coated steel transition adaptor fits all Labconco Coated
Steel Blowers. This adaptor allows you to connect round
thermoplastic duct to the exhaust side of the blower to create an
exhaust stack. Nominal size PVC duct fits inside the adaptor
opening.
Nominal Diameter/Inches 8 10 12
Catalog Number 47224 4722401 70034
Shipping Wt./lbs. 3 4 4
For use with Labconco Blowers 70680-
70687
70680-
70687
70688-
70697
Auxiliary-Air Transition Adaptor
The auxiliary-air transition adaptor is the same construction as the
blower transition adaptor, but is designed to allow you to connect
round thermoplastic duct to the regular auxiliary-air collar of
Protector Fume Hoods.
Nominal Diameter/Inches 10
Catalog Number 48893
Shipping Wt./lbs. 4
T and Y Connections
PVC fittings shaped in T and Y configurations are compatible with
thermoplastic duct. End connections receive PVC pipe directly.
Contact Labconco for help in sizing blowers with these
accessories.
Nominal Diameter/Inches 10x10x12
T’s
Catalog Number 56304
Shipping Wt./lbs. 20
Approx. Height/Inches 19
Nominal Diameter/Inches 10x10x12 12x12x16
Y’s
Catalog Number 56301 56305
Shipping Wt./lbs. 19 20
Approx. Height/Inches 12-3/4 23-1/4