Moving xt clean bench through tight doorway – Labconco Purifie Horizontal Clean Benches 32000 Series User Manual
Page 20
Chapter 3: Getting Started
Product Service 1-800-522-7658
16
Moving XT Clean Bench through Tight
Doorway
MAKE SURE THERE IS NO ALTERNATE DOORWAY OF
GREATER WIDTH. DISASSEMBLY OF UNIT INVOLVES
SIGNIFICANT TIME AND LIFTING OF HEAVY
COMPONENTS.
To remove the Side Windows:
1. Obtain a T20 Torx Head Driver Bit and electrical screwdriver or drill.
2. Unscrew all screws around both the right and left window frames as seen in
Figure 3-5a below. NOTE!!! Do NOT remove Screws next to a small cut-out
as seen in Figure 3-5b. Remove both side window assemblies.
)
Figure 3-5a
Side
Windows
Torx Screws