Hapter, Rerequisites – Labconco Class I Enclosure Models 3980423 User Manual
Page 9
Product Service 1-800-522-7658
5
C
HAPTER
2
P
REREQUISITES
Before you install the filtered enclosure, you need to prepare your site for
installation. You must be certain that the area is level and of solid construction. In
addition, a dedicated source of electrical power should be located near the
installation site to power the filtered enclosure, and other apparatus. Additionally,
the enclosure should be strategically placed in the lab to provide efficient
workflow.
Carefully read this chapter to learn the requirements for your installation site:
The support, vibration and movement requirements.
The location and air current requirements.
The exhaust and blower requirements.
The electrical power requirements.
The space requirements.
Refer to Appendix B: Purifier Dimensions for complete enclosure dimensions.
Refer to Appendix C: Purifier Specifications for complete filtered enclosure
electrical and environmental conditions, specifications and requirements.
- Class I Enclosure Models 3980421 Class I Enclosure Models 3980403 Class I Enclosure Models 3980401 Class I Enclosure Models 3980323 Class I Enclosure Models 3980321 Class I Enclosure Models 3980303 Class I Enclosure Models 3980301 Class I Enclosure Models 3980223 Class I Enclosure Models 3980221 Class I Enclosure Models 3980203 Class I Enclosure Models 3980201 HEPA Filtered Enclosure Models 3980422 HEPA Filtered Enclosure Models 3980420 HEPA Filtered Enclosure Models 3980402 HEPA Filtered Enclosure Models 3980400 HEPA Filtered Enclosure Models 3980322 HEPA Filtered Enclosure Models 3980320 HEPA Filtered Enclosure Models 3980302 HEPA Filtered Enclosure Models 3980300 HEPA Filtered Enclosure Models 3980222 HEPA Filtered Enclosure Models 3980220 HEPA Filtered Enclosure Models 3980202 HEPA Filtered Enclosure Models 3980200