Hapter, Etting, Tarted – Labconco Class I Enclosure Models 3980423 User Manual
Page 12

Product Service 1-800-522-7658
8
C
HAPTER
3
G
ETTING
S
TARTED
Now that the site for your filtered enclosure is properly prepared, you are ready to
unpack, inspect, install, and validate your system. Read this chapter to learn how
to:
Unpack and move the enclosure.
Set up the enclosure with the proper supporting structure and work surface.
Connect to an exhaust system if applicable.
Installation of HEPA and accessory Odor Control carbon filters.
Connect the electrical supply.
Set the face velocity with the speed control adjustment.
Arrange validation for the enclosure.
Seal the enclosure to the work surface.
Depending upon which model you are installing, you may need common
mechanical and electrical installation tools in addition to 5/16", 3/8", 7/16", and
1/2" wrenches, ratchets, sockets, a nut driver set, a flat-blade screwdriver, a
Phillips screwdriver, and a carpenter level to complete the instructions in the
chapter.
Each enclosure model weighs between 125 to 195 lbs. each (55
to 85 kg). The shipping container allows for lifting with a
mechanical lift truck or floor jack. If you must lift the
enclosure manually, follow safe-lifting guidelines.
Do not lift
by the front air foil
.
!
- Class I Enclosure Models 3980421 Class I Enclosure Models 3980403 Class I Enclosure Models 3980401 Class I Enclosure Models 3980323 Class I Enclosure Models 3980321 Class I Enclosure Models 3980303 Class I Enclosure Models 3980301 Class I Enclosure Models 3980223 Class I Enclosure Models 3980221 Class I Enclosure Models 3980203 Class I Enclosure Models 3980201 HEPA Filtered Enclosure Models 3980422 HEPA Filtered Enclosure Models 3980420 HEPA Filtered Enclosure Models 3980402 HEPA Filtered Enclosure Models 3980400 HEPA Filtered Enclosure Models 3980322 HEPA Filtered Enclosure Models 3980320 HEPA Filtered Enclosure Models 3980302 HEPA Filtered Enclosure Models 3980300 HEPA Filtered Enclosure Models 3980222 HEPA Filtered Enclosure Models 3980220 HEPA Filtered Enclosure Models 3980202 HEPA Filtered Enclosure Models 3980200