Labconco Bulk Powder Stations 3962622 User Manual
Page 14

Chapter 3: Getting Started
Product Service 1-800-522-7658
10
Unpacking the Enclosure
Carefully remove the crating and shrink-wrap on the enclosure and inspect it for
damage that may have occurred in transit. Your XPert Powder Enclosure, System,
or Station is shipped as three separate parts: the lift stand, the transfer cart and the
upper enclosure. If damaged, notify the delivery carrier immediately and retain the
entire shipment intact for inspection by the carrier.
DO NOT RETURN GOODS WITHOUT THE PRIOR
AUTHORIZATION OF LABCONCO. UNAUTHORIZED
RETURNS WILL NOT BE ACCEPTED.
IF ENCLOSURE WAS DAMAGED IN TRANSIT, YOU MUST
FILE A CLAIM DIRECTLY WITH THE FREIGHT CARRIER.
LABCONCO CORPORATION AND ITS DEALERS ARE NOT
RESPONSIBLE FOR SHIPPING DAMAGES.
Do not discard the packing material until you have checked all of the components
and tested the unit.
We recommend that you do not remove the enclosure from its shipping container
until it is ready to be placed into its final location. Move the unit by placing a flat,
low dolly under the shipping skid, or by using a floor jack.
Do not move the enclosure by tilting it onto a hand truck.
Installing the Enclosure and Work Surface on the
Lift Stand
Use caution when lifting or moving the upper enclosure or lift
stand. A hydraulic lift, electric lift or forklift is highly
recommended.
See Figure 3-1 for installation.
1.
The lift stand has leveling feet to adjust the height. Be sure the lift stand
height will allow the transfer caddy to latch properly. The lower face of the
transfer cart’s square handle must be placed level with the lower side of the
2" sq. frame on the lift stand. This adjustment allows the transfer cart to
engage properly. (see Figure 3-1)
2.
The stainless steel work surface and upper portion of the enclosure are
shipped as one unit and connected by fasteners. Slide both items as one unit
onto the lift stand. It is easy to do this by elevating both items with a
hydraulic lift table or forklift.
The United
States
Interstate
Commerce
Commission
rules require
that claims be
filed with the
delivery
carrier within
fifteen (15)
days of
delivery.
!
!
- Bulk Powder Stations 3962621 Bulk Powder Stations 3962620 Bulk Powder Stations 3962602 Bulk Powder Stations 3962601 Bulk Powder Stations 3962600 Bulk Powder Stations 3962522 Bulk Powder Stations 3962521 Bulk Powder Stations 3962520 Bulk Powder Stations 3962502 Bulk Powder Stations 3962501 Bulk Powder Stations 3962500 Bulk Powder Systems 3961622 Bulk Powder Systems 3961621 Bulk Powder Systems 3961620 Bulk Powder Systems 3961602 Bulk Powder Systems 3961601 Bulk Powder Systems 3961600 Bulk Powder Systems 3961522 Bulk Powder Systems 3961521 Bulk Powder Systems 3961520 Bulk Powder Systems 3961502 Bulk Powder Systems 3961501 Bulk Powder Systems 3961500 Bulk Powder Enclosures 3963822 Bulk Powder Enclosures 3963821 Bulk Powder Enclosures 3963820 Bulk Powder Enclosures 3963802 Bulk Powder Enclosures 3963801 Bulk Powder Enclosures 3963800 Bulk Powder Enclosures 3963622 Bulk Powder Enclosures 3963621 Bulk Powder Enclosures 3963620 Bulk Powder Enclosures 3963602 Bulk Powder Enclosures 3963601 Bulk Powder Enclosures 3963600 Bulk Powder Enclosures 3963522 Bulk Powder Enclosures 3963521 Bulk Powder Enclosures 3963520 Bulk Powder Enclosures 3963502 Bulk Powder Enclosures 3963501 Bulk Powder Enclosures 3963500