Labconco TXE Tall XPerEnclosure 3892022 - Manual (Page 15)

Chapter 3: Getting Started
Product Service 1-800-522-7658 11
Figure 3-3
TXE Conduit Location for Wiring External Remote Blower
230V Models
The same procedure applies for the 230V except it is shipped without a plug.
Install the appropriate plug for your electrical specifications per local codes. If
using at 50 Hz operations, blower performance maximum airflow will be reduced
by 17%.
Do not use any detachable power cord that is not adequately rated
for the unit.
Ne pas utliser un fil électrique amovible qui n’est pas du tension
nominale de l’appareil.
!