Lab.gruppen LUCIA 240/2M - Manual (Page 15)

14. LUCIA application browser
LUCIA Operation Manual rev 1.0.0
15
14.5.2.1. Input block
Each of the four inputs offers an option for either fl at response (Line) or insertion of a low-cut fi lter optimized for
speech input (Vocal 100 Hz CUT).
Select the option appropriate for your application.
The May 2014 release will offer “Custom” as a third option allowing you to set your own settings for the 4 EQ
sections on each input.
14.5.2.2. Matrix block
The Matrix feature allows any of the four inputs to be routed to any or all of the four outputs: the two loudspeaker
outputs of the amplifi er or the two auxiliary line outputs. The level for each output is adjustable from 0 to -30 dB
using the fader to the right of the matrix.
Manual routing – Click in the box to select the desired input-to-output routing.
Preset routing – Matrix settings appropriate for many applications are available as presets using the scroll-down
menu under Presets below the Matrix box.
Level setting – Select the desired output (framed in blue) and use the fader to set the output level.
Note: The Matrix selection function is disabled when a GPI function is assigned as Source Selector.
(See Section 14.5.2.4). This prevents possible confusion and errors.