beautypg.com

Lucia application browser, Lucia application browser 12, Protection mode – Lab.gruppen LUCIA 240/2M User Manual

Page 12: Introduction, Software download and installation

background image

14. LUCIA application browser

12

LUCIA Operation Manual rev 1.0.0

13.3. Protection mode

The amplifi er enters Protection mode when thermal conditions or current draw exceed safe limits. When the
amplifi er cools below the thermal threshold, or nominal load conditions are restored, the amplifi er exits Protection
mode automatically.

IMPORTANT – Protection mode often results from excessive operating levels, improper load conditions or
insuffi cient ventilation. Always check these conditions any time a LUCIA amplifi er enters Protection mode.

14. LUCIA application browser

14.1. Introduction

The LUCIA Application Browser is a simple, intuitive software editor for confi guring the signal matrixing and DSP
features of LUCIA matrix models (LUCIA 120/M and 240/M). Amplifi er functions are quickly programmed offl ine
and then downloaded to the individual LUCIA units via the USB port.

Note: Transfer of preset data is a one way process. Presets can only be downloaded to the LUCIA

device; you cannot upload settings back to the Application Browser. Therefore, if you want to

connect to a device at a later time and make changes, it is important to save the settings in the

computer running the application browser when you program the LUCIA. This way they can be

recalled, edited and downloaded to the LUCIA device at a later time.

Factory presets for common applications include input and matrix settings plus output equalization

pre-optimized for compatible Tannoy loudspeakers and generic loudspeaker types. All parameters

are user adjustable, allowing creation of custom user presets that may be stored for future use. An

online “sync mode” allows real-time setting of parameters – a useful feature for adjusting loudspeaker

response for room acoustics using the four-band parametric equalizers.

14.2. Software download and installation

The LUCIA Application Browser software is available for free download from the Support section of the
Lab.gruppen web site. Select Software & Firmware from the left-hand menu. You must be registered to access
the download pages.

Under LUCIA, select LUCIA Application Browser. Follow the on-screen instructions. Note that there is no separate
installation wizard. When downloading the compressed (zipped) fi le, simply save to any convenient location
(desktop, documents) where write privileges are available.

This manual is related to the following products: