Lab.gruppen LUCIA 240/2M - Manual (Page 14)

14. LUCIA application browser
14
LUCIA Operation Manual rev 1.0.0
14.5. Application presets: Selection and custom confi guration
14.5.1. Confi guration in application view
Select the factory application or existing user application that is closest to the requirements of the new application.
If necessary, add one or more additional devices to the application. Parameter presets for multiple units can be
saved as one application fi le. Click the “+” at the bottom of the column to add another device to the application.
Note that saving multiple units as one Application is for user convenience only; parameters for each device must
be downloaded separately.
Select a device for editing. The selected device shows a blue frame.
Name Inputs, Outputs and GPIO connections. Click on the existing name to edit the text.
14.5.2 Confi guration in block diagram view
When a device is selected, the corresponding Application parameters are shown in the Block Diagram view in the
right-hand column. Click on the Input Block, Matrix Block, Output Block or Control Block to edit parameters.