Lab.gruppen IPD 2400 - Manual (Page 16)

8. Operation with default preset
16
IPD SERIES Operation Manual rev 1.0.0
8. Operation with default preset
An IPD Series amplifier may be operated “out of the box” as a standard stereo amplifier. For this application, there
is no need to connect the network, download the software, or program a preset in the DSP. Default parameters are
as follows:
Input mixer: Analog 1 and AES 1 routed to channel 1
Analog 2 and AES 2 routed to channel 2
Mode: Stereo
Input levels: 0 dB
Input EQ: Flat
Output EQ: Flat
Delay: Off
Crossover: Off
Output mute: On (muted)
In this mode, the unit will function as a “flat” stereo amplifier. The outputs may be muted and unmuted with the
front panel buttons. The encoder knob functions as an output gain control, with level adjustable from -47.75 dB
to + 12 dB.
9. IntelliDrive controller overview
9.1. Introduction
IntelliDrive Controller offers fast, intuitive and comprehensive access to the many DSP features offered by IPD
Series amplifiers. Although it is possible to program presets and alter existing presets using the front panel controls
(See Section 14), most users will find the process is easier and more accurate using IntelliDrive Controller. In
most cases, the front panel controls are best reserved for changing presets or making minor level adjustments in
circumstances where a control computer is not available or when network problems are encountered.
Note: This manual assumes the user is familiar with the basic principles of loudspeaker system DSP configuration,
including multi-way loudspeaker system alignment, room tuning, and delay setting. If you are not familiar with these
procedures, we recommend you consult a reference book or online source presenting a comprehensive treatment
of the topic.
9.2. Global (System) View
The Global, or System, View presents a graphical representation of all amplifiers connected to the network,
indentified by IP address or user defined name. The Global View gives an at-a-glance overview of amplifier groups
and amplifier status, including Mute status and output level meters.