D-Link DCS-900 - Manual (Page 26)

26 D-Link DCS-900 User Manual
Section 3 - Configuration
This is the IP address of the FTP server that
you will be connecting to.
Default is port 21. If changed, external FTP
client program must change the server
connection port accordingly.
Specifies the user name to access the external
FTP server. If you are to upload snapshots to
an FTP server you will need to fill in the Domain
name or IP address of your external FTP server.
The following user settings must be correctly
configured for remote access.
Specifies the password to access the external
FTP server.
Specifies the destination folder in the external
FTP server.
Enabling passive mode will allow access to an
external FTP server if your camera is behind a
router protected by a firewall.
Host Address:
Port Number:
User Name:
Password:
Directory Path:
Passive Mode:
Upload