D-Link DCS-900 - Manual (Page 22)

22 D-Link DCS-900 User Manual
Section 3 - Configuration
Manually provide a fixed IP Address for your
connection.
Enter your IP Address, this is necessary for
network identification.
Provide a Subnet Mask, this will be used to
determine if the destination is in the same
subnet.
Enter your Default Gateway.
Dynamic Host Configuration Protocol is a
networking protocol that will allow leasing of
an IP address by the client from a server for
a specified amount of time. This alleviates the
task of the user from having to keep track of
available IP Addresses onthe network.
If you use the DCS-900 to connect directly to
the Internet you will need to put in the user
name and password that was given to you
when you initially set up your account with the
Internet Service Provider.
Fixed IP:
IP Address:
Subnet Mask:
Default Gateway:
Dynamic IP
(DHCP):
PPPoE:
Network