Konig Electronic Digital 2.4 GHz wireless camera system - Manual (Page 15)

15
10 second interval 15 second interval
Note:
1. Camera ON/OFF setting in CAMERA SETUP section will affect which camera(s) can be displayed
during IDLE DISPLAY.
2. Audio (single channel at anytime) will be available during QUAD mode (by default on channel 1 or
the next available channel with a camera paired to the system), single FULL screen mode (auto
switch to channel viewing at the time), or the channel triggered by motion.
3. Audio channel will stay connected until the channel is switched.
4. If set to 5/10/15 sec. interval then select SCAN ACTIVATED CAMERAS to achieve this display
mode.
Default:
Use ▲▼ to select DEFAULT. Press MENU to enter.
Use ◄► to select the system language for SYSTEM RESTORE, press MENU to confirm the selection
and the system will restore to factory default (only ENGLISH AVAILABLE).
Press ESC to exit.
Alarm buzzer