Konig Electronic Digital video recorder with built-in 1 TB hard disk - Manual (Page 28)

ENGLISH
28
Picture 5-38
¾ Sender address: indicates sender’s email address.
The email address should be consistent with the
server you use. That is to say, when you use email
address – [email protected], the according server
should be smtp.gmail.com.
¾ Receiver address: indicates receiver’s email
address. The email address is used to receive
image transmitted from DVR alarm. Please clear
the images you have received as soon as possible
to avoid overloading your email account.
5�2�4�6 DDNS Set
Picture 5-41
¾ Server: select DDNS provider
¾ Host name: input the host domain name you
have registered at dynamic domain name system,
such as: DVR2009.3322.org;
¾ User Name: Input a user name registered before
applying for a domain name;
¾ Password: Input a password you set when
registering a user name.
Click [Apply] button and restart the DVR; and then enter the domain name
(such as: http://superdvr.3322.org:8080) to visit your remote DVR.
5�2�5 Alarm
5�2�5�1 Motion
Click [Main menuAlarmMotion] to enter into the interface shown as Picture 5-42.
Picture 5-42
¾ Channel: allow you enable/disable the motion
function for any channel.
¾ Area: Click the [Setup] button to enter into area
setup interface shown as Picture 5-41.
¾ Sensitivity: allow you to set sensitivity level of
motion detection from higher to low with 8 being
the most sensitive.
¾ Alarm out: allow you connect external alarm
sensor.
¾ Latch time: you can set how long the buzzer will sound when object move is detected
(10s, 30s, 40s, 60s).
¾ Show Message: You can set show message on the screen when motion alarm is detected.