Konig Electronic Digital video recorder with built-in 1 TB hard disk - Manual (Page 24)

ENGLISH
24
5�2�3�6 Log Search
Go to [Main menuSearchLog] option to
enter into the Log search interface shown as
Picture 5-28.
Herein allow you preview the log information
you have searched. And click [Backup] to
export all the log information which is listed.
For other button functions please refer to
previous section 5.2.3.4-Event Search.
Picture 5-28 Picture 5-29
5�2�4 Network
5�2�4�1 Network set
Click [Main menuNetworkNetwork] to enter into the below interface shown as
Picture 5-30.
Picture 5-30
After selecting network mode - such as DHCP, PPPOE
or static allocation- and setting up web ports, you can
visit DVR remotely through a network or internet.
UPnP (Universal Plug and Play) function: If router
supports UPnP function and set to “Enable”,
system will automatically forward port to router.
DNS: DNS server is generally provided by local ISP. Herein please enter the IP address of
your DNS
Picture 5-31
When selecting DHCP from the Type, A router will
automatically allocate IP address for your DVR. After
restarting each time, the IP address captured by your
DVR may be different. So, port forwarding is required
when you visit a remote DVR.
1. Select DHCP and click [Apply] button;
2. Exit and restart DVR;
3. Input media port and HTTP port
4. Set IP address captured by DVR and HTTP port to a router