Konig Electronic 4 x 4port HDMI matrix switch - Manual (Page 2)

2
ENGLISH
Introduction:
This switch splitter routes high definition video in multiple resolutions up to 1080p plus multichannel
digital audio from any of the four HDMI sources to the displays. Four outputs give you the choices of
sending high definition audio and video signals up to four displays in any combinations. Any four to
any four true matrix switching allows for maximum versatility for integrated systems. It eliminates the
need to disconnect and reconnect sources to a display equipped with one input. It works with HD-DVD
players, TiVo systems, HT PCs, and satellite set top boxes that connect to an HDMI display. Every
source is accessible at all times by any display by selecting it with an IR remote or through RS232
port.
Features:
This product has many features that enable it to perform in a superior manner. Among those features
you will find:
• Allows any HDMI display to view any source at any time
• Allows any source to be displayed on multiple displays at the same time
• HDMI or DVI to HDMI cables are used to connect the inputs and the matrix output
• Each display’s inputs can be switched with the IR remote control or through RS232
• Support HDMI 1.3b
• Support highest video resolution 1080p.
• Support 225MHz/2.25Gbps per channel (6.75Gbps all channel) bandwidth.
• Support 12bit per channel (36bit all channel) deep color.
• Support HDCP
• Support uncompressed audio such as LPCM.
• Support compressed audio such as DTS Digital, Dolby Digital (including DTS-HD and Dolby True HD).
2.0 SPECIFICATIONS:
Signal inputs/output
HDMI connector type A 19 pin female
Input DDC signal 5 volts p-p (TTL)
Remote control port RS-232 female, mini-stereo
Operating frequency
Vertical frequency range 50/60Hz
Video amplifier bandwidth 2.25Gbps/225MHz
Resolutions(HDTV)
Interlaced(50&60Hz) 480i,576i,1080i
Progressive(50&60Hz) 480p,576p,720p,1080p
Warranty
Limited warranty 1 Year parts and labor
Environmental
Operating temperature 0ºC to +70ºC
Operating humidity 10% to 85 % RH (no condensation)
Storage temperature -10ºC to +80ºC
Storage humidity 5% to 90 % RH (no condensation)
Power requirement
External power supply 5V DC@4A
Power consumption(max) 15W
Regulatory approvals
Converter unit FCC,CE,UL