Imaxrc X350 - Manual (Page 4)

iM·OS System
www.imaxrc.com/x350.html
LiPo
Balance
LiIon
Charge
LiFe
FastCharge
NiMH
Storage
NiCd
DisCharge
Pb
Checker
Manual Charge
Cycle
Lipo Battery,Single Nominal Voltage: 3.7V,Charge cut-off voltage 4.2V,Dis-
charge cut-off voltage 3.0V
Lipo balance charge use CC-CV charging way. The charger will balance the battery voltage
when charging, this only for LiPo battery. Please connecting the balance port when charging
and discharging. Support 2-6 cells.
LiIon Battery,Single Nominal Voltage: 3.6V,Charge cut-off voltage 4.1V,-
Discharge cut-off voltage 2.5V
Use CC-CV charging way. On the basis of Users setting current the charger will charge the
battery to the cut-off voltage. Warning: The voltage can not balance even connecting the
balance port when using LiPo battery.
LiFe Battery,Single Nominal Voltage: 3.3V,Charge cut-off voltage 3.6V,Dis-
charge cut-off voltage 2.0V
FastCharge. Almost same as the Charge Mode. The only difference is the current only 1/5 and
the other setting only 1/10 of the setting current when finished charging.Warning: The voltage
can not balance even connecting the balance port when using LiPo battery.
NiMH Battery,Single Nominal Voltage: 1.2V,Charge cut-off voltage 1.5V,-
Discharge cut-off voltage 1.0V
Charging and discharging the battery voltage to a certain numerical for easy storage. This
function only for LiPo battery which need connecting the balance port. Support 2-6S.
NiCd Battery,Single Nominal Voltage: 1.2V,Charge cut-off voltage 1.5V,-
Discharge cut-off voltage 0.85V
Use CC-CV charging way. On the basis of Users setting current the charger will discharge the
battery to the cut-off voltage. Warning: Please connecting to the Balance port when use LiPo
battery.
Pb Battery,Single Nominal Voltage: 2.0V,Charge cut-off voltage 2.5V,Dis-
charge cut-off voltage1.72V
Measuring Mode. The charger only collect battery primary port and balance port voltage,but can
not charge and discharge.
This function only for NiMH battery which same as The Charge mode.
This function only for NiMH battery. On the basis of Users setting current for MiNH battery cycle
charging and discharging.The Cycle times is 1-6.