Imaxrc X350 User Manual
Page 15
17
18
Image 23
Step 2: Touch Mode icon ( Image 23 ) to enter into Mode interface. Touch Charge icon
( Image 24 ) to go back to main interface and continue setting.
Image 24
【NOTE】
There are four charge/discharge modes in Mode interface( Image 24 ), see
iM.OS System function for further details. please set charge/discharge mode accord-
ing to your requirement. Image 24 is showing charge mode.
Image 25
Step 3: Touch Cells icon ( Image 25 ) to enter into Cells interface. Please set NiMh battery
packs by sliding ( Image 26). Touch OK to go back to main interface and continue setting.
Image 26
【NOTE】
The battery cannot be charged if each pack of the battery voltage is less than
0.7V, please use the less battery packs to activate charging process. If you need lower
voltage during discharging process, please use the less battery packs to discharge.
Chapter 1
Preparing、Connecting、Using
Chapter 1
Preparing、Connecting、Using