HITEC X1 AC Plus: Single Port AC/DC Chargers - Manual (Page 33)

33
A beep sounds to confi rm the user’s operation every time a button is pressed.
The buzzer or melody sounds at various times during an operation to confi rm a
diff erent mode change. These functions can be switched on or off .
See pg. 28 for instructions on accessing the “
Key Beep
“ and “
Buzzer
“ screen.
Press the ► button once and (Key Beep) “
ON
” will begin
fl ashing. Use the ✚ or ▬ buttons to turn “
Keep Beep
“
off . Press the ► button once and (Buzzer) “
ON
” will
begin fl ashing. Use the ✚ or ▬ buttons to turn “
Buzzer
“
off .
This function monitors the voltage of the input source used to power the char-
ger. If the voltage drops below the user setting, the program will end forcibly to
protect the input source.
See pg. 28 for instructions on accessing the “
Input Power Cut-off
“ screen.
Press the ► button once and the voltage value will
begin fl ashing. Use the ✚ or ▬ buttons to change the
voltage.
Press
► to set the voltage.
Lithium Additional Features & Settings
Key Beep & Buzzer
Input Power Cut-off
Key Beep ON
Buzzer ON
Key Beep OFF
Buzzer OFF
Input Power Low
Cut-off 10.0V