HITEC X4 AC Plus: Four Port ACDC Multi-Charger - Manual (Page 3)

Menu Control Buttons
Menu Control Buttons
LCD Screen
03 02
INTRODUCTION CHARGER LAYOUT
Power Source
Charge Power
Discharger Power
Cell Count
Current Drain for Balancing Lithium
Charge Termination
NiCd/NiMH
Lead-Acid and Lithium
Dimensions
Net Weight
100-120V AC, 12V DC Car Battery or
11-15V DC Power Supply
50 Watts, current is regulated accordingly
e.g. 11.1 V battery, charge current approx. 4.5 A
e.g. 22.2 V battery, charge current approx. 2.2 A
5 Watts, current is regulated accordingly
1-15 NiCd/NiMH cells
1-6 LiPo/LiIon/LiFe cells
1-10 Lead-Acid cells (2V - 20V)
300mA
Automatic, negative delta-peak method
Automatic, voltage-dependent, CC-CV process
8.9” x 6.7” x 2.6”
3.4 lbs.
Operating Voltage Range DC 11 - 15 Vol t
The Hitec X4 AC Plus allows you to charge up to four different batteries simultaneously.
The charger will automatically charge all 4 batteries at a time to their maximum capacity.
Additionally the batteries being charged do not need to have the same configuration or the
same chemistry. Therefore you can connect any one of a NiMH/NiCD/LiPo/LiFe battery
into any of the charging ports. This eliminates the time consuming efforts of charging all
your batteries separately.
Specifications
Battery
Battery Sockets
Universal Balancing
Port Pitch=2.54mm
Universal Balancing
Port Pitch=2.54mm
AC Input Power Port
Temp Sensor PC Link
Available for 1 & 3 only output
Temp Sensor PC Link
Available for 2 & 4only output
Ventilation Fan
with Temperature
Sensor Control
Sockets
Battery
Sockets DC Input
Socket
100-120V AC
220-240VAC
(US Version)
(EU Version)