HITEC P-51 Mustang - Manual (Page 12)

Step 1: Landing Gear Assembly.
Slide the landing gear into the slot of the main wing making sure they are in the
correct position. Using a #0 Phillips head screwdriver and the 2, 2.0 x 8 mm screws,
secure the landing gear to the wing.
Step 2: Attach the Main Wing.
Attach the main wing to the fuselage by
sliding the tabs into the front of the fuse-
lage making sure to guide the servo leads
through the hole in center of the fuselage.
Using a #1 Phillips head screwdriver and
the 4 x 35mm machine screw, secure the
wing to the fuselage
STEP 1 STEP 2
ASSEMBLY INSTRUCTIONS - HAWKER HURRICANE MKIIB
STEP 3
STEP 4
Step 3: Assembly of the Tail Plane
a. Apply a small amount of glue to the
top of the horizontal stabilizer where
the vertical stabilizer attaches.
b. Next slide the tabs of the vertical
stabilizer through the top of the hori-
zontal stabilizer which will give you the
assembly shown above.
c. Now slide the assembly in to the
fuselage and secure using the two
2 x 10mm screws.
Step 5: Attach the Auxiliary Fuel Tanks and Guns (optional)
a. To attach the auxiliary fuel tanks to the wings apply a small amount
of glue and position them in place on the bottom of the wings.
b. To attach the guns to the wings apply
a small amount of glue and position
them in their place on top of the wings.
Tools Required for Assembly
#0 and #1 Phillips Head Screwdrivers
- 12 -