Hanna Instruments HI 9064 User Manual

Page 7

WARRANTY

All Hanna Instruments meters are guaranteed for two years
against defects in workmanship and materials when used for their
intended purpose and maintained according to instructions.

The probes are guaranteed for a period of six months.

This warranty is limited to repair or replacement free of charge.

Damage due to accident, misuse, tampering or lack of prescribed
maintenance are not covered.

If service is required, contact the dealer from whom you purchased the
instrument. If under warranty, report the model number, date of
purchase, serial number and the nature of the failure.

If the repair is not covered by the warranty, you will be notified of the
charges incurred. If the instrument is to be returned to Hanna
Instruments, first obtain a Returned Goods Authorization number
from the Customer Service department and then send it with shipping
costs prepaid.

When shipping any instrument, make sure it is properly packaged for
complete protection.

All rights are reserved. Reproduction in whole or in part is prohibited
without the written consent of the copyright owner.

HI 70605/2 RH probe with built-in temperature sensor, 2 m (6.6')

cable and perforated cap (for HI 9065)

HI 70605/5 RH probe with built-in temperature sensor, 5 m

(16.5') cable and perforated cap (for HI 9065)

HI 70607/2 RH probe with 2 m (6.6') cable and sintered cap (for

HI 9065)

HI 70607/5 RH probe with 5 m (16.5') cable and sintered cap (for

HI 9065)

HI 70608/2 RH probe with 2 m (6.6') cable (for HI 9064)
HI 70608/5 RH probe with 5 m (16.5') cable (for HI 9064)
HI 7101

Calibration chamber for probes with perforated cap,
complete with O-ring and precalibrated saturated salts

HI7111/P

Spare saturation LiCl salts for low humidity calibration
(15 g, 6 pcs)

HI7121/P

Spare saturation NaCl salts for high humidity calibra-
tion (33 g, 6 pcs)

HI 721317

Rugged carrying case

TEMPEARURE PROBES FOR HI 9065

HI 765A

Temperature probe for air measurements

HI 765L

Temperature probe for liquid measurements

HI 765PW

Penetration temperature probe, white handle (also
available with different handle colour)

HI 765W

Wire temperature probe, whitout handle, for hard-to-
reach places

ACCESSORIES

Hanna Instruments reserves the right to modify the design, construction and

appearance of its products without advance notice.

This manual is related to the following products:

HI 9065