Hanna Instruments HI 955201 - Manual (Page 2)

3 2
Dear Customer,
Thank you for choosing a HANNA instruments
®
product.
Please read this instruction manual carefully
before using the instrument.
This manual will provide you with all the neces-
sary information for the correct use of the
instrument, as well as a precise idea of its
versatility in a wide range of applications.
If you need additional technical support, do not
hesitate to e-mail us at [email protected]
These instruments are in compliance with the
directives.
Warranty ..................................................... 3
General Description .................................... 4
Preliminary Examination ............................. 5
Display Functional Description ................... 5
Functional Description
HI 955201 and HI 955202 ........................ 6
Specifications HI 955201 and HI 955202 .... 7
Functional Description
HI 955301 and HI 955302 ........................ 8
Specifications HI 955301 and HI 955302 .... 9
Initial Preparation ...................................... 10
Operational Guide ...................................... 11
Printing / Recording with
HI 955201 and HI 955202 ...................... 15
Printing / Logging with
HI 955301 and HI 955302 ...................... 17
Data Transfer to PC .................................. 27
Fault Functions ........................................ 28
Memory Organization ............................... 29
Printer Maintenance .................................. 30
Battery Replacement ................................ 32
Calibration ................................................. 33
Accessories .............................................. 34
CE Declaration of Conformity ................... 35
TABLE OF CONTENTS
WARRANTY
All Hanna Instruments meters are warranted
for two years against defects in workmanship
and materials when used for their intended
purpose and maintained according to instruc-
tions. The probes are warranted for a pe-
riod of six months.
This warranty is limited to repair or replacement
free of charge. Damages due to accident, mis-
use, tampering or lack of prescribed mainte-
nance are not covered.
If service is required, contact the dealer from
whom you purchased the instrument. If under
warranty, report the model number, date of
purchase, serial number and the nature of the
failure. If the repair is not covered by the
warranty, you will be notified of the charges
incurred.
If the instrument is to be returned to Hanna
Instruments, first obtain a Returned Goods
Authorization Number from the Customer Ser-
vice department and then send it with shipment
costs prepaid. When shipping any instrument,
make sure it is properly packaged for complete
protection.
All rights are reserved. Reproduction in whole or
in part is prohibited without the written consent
of the copyright owner.
Hanna Instruments reserves the right to modify
the design, construction and appearance of its
products without advance notice.