Hanna Instruments HI 84429 - Manual (Page 30)

30
• From the titrator main screen press Titration. To enter titrator main screen from pH meter
mode press Titrator and then Continue.
• Press Start to begin the titration process.
• After the titration is started on the upper right side of the display two animations will be
shown in order to indicate that the pump and the stirrer are running. On the lower right side
of the display is shown the period of time since the titration has been started.
• After the titration is complete, the concentration value is displayed in the selected unit.
• Press Unit to change the display unit.
• Press LOG to record the concentration value into the instrument’s memory.
A message will be dislayed for a few seconds indicating the amount of the free log space. Up
to 50 log samples can be recorded in the instrument’s memory. When the free titrator log
space is under 12% the message will be shown permanently.