Glass cleaning, Fireplace surface cleaning – Dimplex DF3215NH User Manual
Page 19

19
x 1 inch rated at MERv 10. If using an after market filter follow the
manufacturers recommended replacement instructions.
To replace filter:
1. Open the Bi-fold
doors.
2. Remove the three
(3) mounting screws
from the Air Filter
Bracket.
3. Remove the Air
Filter Bracket
assembly from the
firebox.
4. Slide Filter out of Air
Filter Bracket.
5. Replace filter and
reassemble in
reverse order as above.
!
NOTE: If after market air filter is used ensure it is installed
according to the manufacturer’s recommended instructions.
Glass Cleaning
The glass is cleaned in the factory during the assembly operation.
During shipment, installation, handling, etc., the glass may collect dust
particles, these can be removed by dusting lightly with a clean dry
cloth.
To remove fingerprints or other marks, the glass can be cleaned with
a damp cloth. To prevent scratching, do not use abrasive cleaners or
spray liquids on the glass surface.
Fireplace Surface Cleaning
Use a cloth dampened with warm water only to clean painted surfaces
of the electric fireplace. Do not use abrasive cleaners.
Figure 11
Air Filter
Bracket
Mounting
Screws