Dimplex DF3215NH - Manual (Page 13)

13
Remote Control Functions (Figure 6)
* The set temperature buttons are not operational on the DF3215Nh model
fireplaces.
A - Room Temperature
B - Set Temperature*
C - Dimmer/Firelight Control
D - Flame Speed Control
E - Slow Start/Fading Embers
Control
F - Purifire™ Speed
G - Flame & Heat On/Off
H - Purifire™ On/Off
I - Temperature Down*
J - Temperature Up*
K - Dimmer Down/Firelight Off
L - Dimmer Up/Firelight On
M - Flame Speed Down
N - Flame Speed Up
O - Slow Start/Fading Embers
Off
P - Slow Start/Fading Embers
On/Timer Cycle
Q - Purifire™ Low Speed
R - Purifire™ High Speed
B - Set Temperature*
1. Press
G - Flame & Heat On/Off button to turn the fireplace on.
2. Press J - Temperature Up to raise thermostat.
3. Press I - Temperature Down to lower the thermostat.
4. Press both J - Temperature Up and I - Temperature Down to
change °F to °c.
* Not applicable on DF3215NH model fireplaces.
C - Dimmer/Firelight Control
1. Press the
G - Flame & Heat On/Off button to turn the Flame &
heat on.
2. Repeatedly press the L - Dimmer Up/Firelight On or K - Dimmer
Down/Firelight Off button to increase or decrease the brightness
of the upper lights.
3. To activate the Firelight, continue pressing L - Dimmer Up/Fire-
light On until the Firelight On icon is shown on the display screen.
4. To shut the Firelight off continue pressing the K - Dimmer Down/
Firelight Off button until the Firelight Off is shown on the display.