Dimplex DF3215NH User Manual

Page 14

D - Flame Speed Control
1. Press the

G - Flame & Heat On/Off button to turn the Flame &

heat on.

2. Press the

N - Flame Speed Up button to increase the speed of the

flame.

3. Press the

M - Flame Speed Down button to decrease the speed of

the flame.

E - Slow Start/Fading Embers Control
The

Slow Start function simulates a starting fire. The function is

automatically programmed for 30 seconds and the timer setting cannot

be changed. The

Fading Embers function simulates a fire going out.

The

Fading Embers timer can be set to 1, 5 or 10 minutes.

1. Press the

P - Slow Start/Fading Embers On/Timer Cycle button

to turn the

Slow Start/Fading Embers function on.

2. Press the

P - Slow Start/Fading Embers On/Timer Cycle button

repeatedly to set the

Fading Embers timer to 1, 5 or 10 minutes.

3. Press the

O - Slow Start/Fading Embers Off button to turn the

Fading Embers timer function off.

F - Purifire™ Speed
When the

Purifire™ function is on, the Purifire™ symbol will flash.

When off the symbol will be solid. The default setting for the

Purifire™

is set at low speed.
1. Press the

H - Purifire™ On/Off button to turn the Purifire™

function

On.

2. Press the

Q - Purifire™ Low Speed to decrease the Purifire™

speed or the

R - Purifire™ High Speed to increase the speed.

3. Press the

H - Purifire™ On/Off button to turn the Purifire™

function off.

NOTE: To turn the Flame & heat and Purifire™ off, press both

control buttons simultaneously.

G - Flame & Heat On/Off *
Press the

G - Flame & Heat On/Off button to turn the Flame & heat

function on. When the

B - Set Temperature is higher then the