Dimplex DF3215NH - Manual (Page 12)

12
Figure 6
I
K
M
O
Q
J
L
N
P
R
A
C
E
G H
F
D
B
Initializing the Remote Control
1. Plug cord into 120 volt wall outlet.
2. Ensure the Main On/Off Switch of the fireplace (Figure 4) is in the
On position.
3. Set the 3 Position Manual control (Figure 4) to the Remote position
(left position).
4. Press and hold the Initialization Button on the unit (Figure 4).
5. While holding the Initialization Button, press the Flame/heat On/
Off button or the Purifire™ On/Off button on the remote control
transmitter (Figure 6).
6. Release the Initialization Button on the unit.
7. Press the Flame/heat On/Off button
to turn the Flame/heat
function on or press the Purifire™ On/Off button to turn the
Purifire™ function on.