Hanna Instruments HI 9124 - Manual (Page 4)

4
TAGS & SYMBOLS
• Mode tags lights up for indicating the corresponding active
mode, and blinks for warning the user.
MEASURE on
: measurement mode.
SETUP on : SETUP menu mode has been entered.
CALIBRATION on : calibration mode has been entered.
MEMORIZE on : measurement stored in the internal memory and
frozen on the display
RECALL MEMORIZED on
: stored value recalled.
• Battery symbol blinking: low battery condition. Batteries should
be replaced.
• Calibration messages.
WAIT NOT READY blinking : buffer has been recognized, but
reading is not stable.
READY on
: buffer has been recognized and reading is stable.
WRONG and WRONG blinking alternatively: wrong
buffer, value not recognized.
• Main active key messages light up for indicating the
corresponding active key.
CFM blinking
: ask for confirmation of calibration or set value.
MR on : MR key available.
MEM on : MEM key available.
CAL on : CAL key available.
RANGE on : RANGE key available. (HI 9125 only)
SETUP on : SETUP key available.
LCD MESSAGE GUIDE LCD MESSAGE GUIDE LCD MESSAGE GUIDE LCD MESSAGE GUIDE LCD MESSAGE GUIDE