Hanna Instruments HI 9124 User Manual

Page 19

Text mode
Original mode

PREPARATION PROCEDURE

Remove the electrode protective cap.
DO NOT BE ALARMED IF ANY SALT DEPOSITS ARE PRESENT. This is
normal with electrodes and they will disappear when rinsed with
water.
During transport tiny bubbles of air may have formed inside the glass
bulb. The electrode cannot function properly under these conditions.
These bubbles can be removed by "shaking down" the electrode as
you would do with a glass thermometer.
If the bulb and/or junction are dry, soak the electrode in HI 70300
Storage Solution for at least one hour or longer.

Not present in gel electrodes.

EEEEELECTRODE CONDITIONING & MAINTENANCE

LECTRODE CONDITIONING & MAINTENANCE

This manual is related to the following products:

HI 9125