Hanna Instruments HI 9124 - Manual (Page 14)

14
Instrument allows the user to configure several parameters through
the Setup Menu.
To enter the SETUP mode, while in measurement mode, press and
hold the SETUP key for about 5 seconds. When the key is released
the first parameter will be displayed.
Once the menu is entered, each parameter can be changed by using
the ARROW keys; then pressing the CFM key will confirm the value
and scroll to the next parameter.
1. Audible signal: On (default) or Off
2. Auto-off feature: 20 minutes (default) or disabled
3. Temperature measure unit: ºC (default) or ºF
After setting the last parameter, pressing the CFM key will confirm
the value and return to measurement mode.
S E T U P M E N U S E T U P M E N U S E T U P M E N U S E T U P M E N U S E T U P M E N U