Hall Research VSA-51-R - Manual (Page 7)

Digital AV Room Control System
7
projectors. The VSA-51-R mounts inside the cage keeping connections securely
fastened and all electronics below the ceiling. The projector inversely mounts to the
bottom of the cage and can be adjusted on 3-axis using the adjustment knobs.
VSA-UI-8
The VSA-UI-8 expands the UI panel capability by adding 8 additional
buttons. Each button is programmable via the Web Manager software. The
VSA-UI-8 connects directly to the VSA-UI-DP via a short cable.
VSA-PGSNS
The VSA-PGSNS is an optional kit to enable the Priority Page
Sense Mute feature. It uses a non-invasive sensor that monitors
existing PA lines without having to splice into the wires. The
sensor detects when the PA system is activated and sends a
signal to the VSA-51 to mute the audio. Once the PA line goes
quiet the VSA-51 resumes audio.
W e b Co n fig u ra t io n & re a l t im e IP Co n t ro l
The VSA-51 offers true flexibility in access and control embedded in the receiver and
served over HTTP to a browser. This means you can access and control the device
from a PC, Mac, smart phone, or tablet without having to install any software or App
VSA IP Manager
The Web Manager is divided into 3 main top level sections: Status, Control and
Configuration. The Status tab displays a summary of unique information about the
system configuration and its state.
The Control tab displays a dynamic user interface to control the system, similar to the
User Interface panel (VSA-UI-DP) and expansion (VSA-UI-8).
The Configuration tab is where all configuration takes place including system settings,
users, actions, buttons, grouping, and scheduling.
Please refer to complete VSA-51 User Manual (available at
www.hallresearch.com ) for
further information on hardware and IP Manager.