Hall Research VSA-51-R - Manual (Page 4)

Quick Start Guide
4
VSA-V-DP Front and Rear
1. VGA input accepts both RGBHV and YPbPr signals on an HD15 connector.
2. Local VGA Output loops the VGA input signal out for use at a local display.
3. Power LED indicates power received from VSA-51-R.
4. Audio Output loops the Audio input out for use at a local audio monitor.
5. Audio input accepts stereo audio on a 3.5mm jack.
6. RJ45 Port A connects to Port A of VGA1 or 2 on the VSA-51-R via Cat5 cable.
7. RJ45 Port B connects to Port B of VGA1 or 2 on the VSA-51-R via Cat5 cable.
Re c e iv e r Co n n e c t io n s
VSA-51-R Front
1. VGA input #1. Connect to a VSA-V-DP via 2x UTP cables.
2. VGA input #2. Connect to a VSA-V-DP via 2x UTP cables.
3. HDMI input. Connect to a VSA-H-DP via 2x UTP cables.
4. Composite input #1. Connect to a VSA-C-DP via 1x UTP cable.
5. Composite input #2. Connect to a VSA-C-DP via 1x UTP cable.
6. Discrete outputs via Phoenix connector.
7. IR output via 3.5mm jack
(use with Optional IR Emitter Cable Model CIR-EMT).
8. User Interface input. Connect to VSA-UI-DP via 1x UTP cable.