Hall Research KVM-U8 - Manual (Page 7)

Model KVM-U4 * KVM-U8
5
2.4 Front Panel
Figure 1 - Front Panel
• Online Status Indicator: The Red LED indicates when a computer
is connected and powered.
• Active Selection Indicator: The Green LED indicates which port is
selected. The LED will flash if no computer is connected to the port.
• Reset Combination: Press buttons 5 and 0 simultaneously to restart
the switch.
• LED Bank Indicator: This 7 segment LED indicates the selected
bank when multiple units are daisy-chained.
• Bank Selection: This button will cycle through daisy-chained banks.
• Port Selection: Press the 2 digit port number to immediately switch
to the port. For example, press “0” then “6” to switch to port 6. Press
the single digit port number and wait 2 seconds to switch to the port.
2.5 Rear Panel
Figure 2 - Rear Panel
2.6 Installation
Before installation, please make sure all peripherals and computers are
turned off.
Active Selection Indicator
Online Status Indicator
LED Bank Indicator
Reset Combination
Bank Selection
Port Selection
Console Keyboard/Mouse
Console Video/ Daisy Chain
Daisy Chain Host Port Connector
Flash Upgrade
DC Power Jack
Optional KVM Over IP