Hall Research VSA-31-SP-W - Manual (Page 6)

Model VSA-31-SP
4
2.0 Features
 User interface control panel available as 2-gang wall plate or desktop
standalone keypad
 Wall plates available in both white or black color
 Programmable relay contacts can switch on or off with any button
 Accepts 2 VGA and 1 TV-Video (Composite or S-Video) each with its own
stereo audio
 Accepts microphone input (with phantom power and microphone
preamplifier with programmable gain) on XLR connector or rear 3 pin
header
 Selectable volume control and mute button for the AV and Microphone
audio
 Provides individual buttons for turning the projector on/off, selection of the
video source, both volume control and mute selection and a user definable
button
 Bidirectional RS232 connection from the control wall plate to the receiver
 Sends selected AV to a remote receiver unit via 2 CAT5 Cables
 No power supply is needed for the wall plate or connector panel, only at the
receiver
 Simple UTP (CAT5) cable connections between the wall plates and the
receiver
 Remote unit can be up to 750 ft away with automatic video compensation
 Built-in 20 Watt (10x2) Stereo Amp drives a 4 or 8 ohm speakers directly
 Automatically controls projector operation (on/off and source selection) via
serial commands stored in the unit
 In-activity timer capable of up to 8 hours to turn off the projector
 Comes with Windows™ GUI software and cable for programming
 Supports 1200, 2400, 4800, 9600, 14400, 38400, 57600 and 115200 Baud
Rates
 Supports Parity of NONE, EVEN or ODD